Important Information
The water temperature sensor (included in the kit) must be installed inside the black aluminum sensor holder. This should be mounted on the engine outlet.
For installation details, refer to the Stand-Alone Instruction Manual.
The pump control unit receives the signal directly from the water temperature sensor and not via CAN connection.
Wiring and Customization: The kit comes standard with 1-meter-long cables so that the user can:
- take measurements for positioning the control unit;
- provide us with the required cable lengths;
- receive a custom-made kit optimized for their motorcycle.
Upon request, we can supply the control unit with pre-wired cables.
Note: Since fan connectors vary between motorcycle models, the fan control comes with open wires..
The user is responsible for selecting and installing the most suitable connector.
Pump Installation: The pump’s positioning must be determined by the user.
Water hoses are not included in the kit and must be purchased separately and cut to length by the user.
Pump Dimensions:
- Pump body diameter: 54 mm
- Pump body length: 140 mm
- Pump body + outlet length: 160 mm
Control Unit Dimensions:
- Width: 80 mm
- Length: 110 mm
- Thickness: 19 mm
Pump Configuration Types: The pump is available with two different inlet/outlet configurations:
- Vertical inlet / Horizontal outlet
- 90° inlet / Horizontal outlet
