Kit Stand Alone Kart

Engine temperature cooling stand alone kit for all types of liquid cooled single speed gearboxes (ok-j / ok / rok / x30 / rotax / etc).
It can be interfaced with all AIM systems (myChron 4/5) for automatic switching on of the pump when the engine is started.
Water temperature settable from 44 to 74° C electronically managed.

MonzaTech IEC kit

Kit components

IEC

01

Electric water pump MWP-030

02

Wiring depending on the version chosen

03

Stainless steel steering wheel controller mounting bracket

04

Pump mounting bracket on the kart tube

05

Adapters according to the pipe diameter (Ø28, Ø30, Ø32)

06

4-cell battery with dedicated wiring (optional)

07

LiPo charger (optional)

08

Battery holder (optional)

09

Extension cable for direct power supply from the engine starter battery (optional)

MonzaTech IEC kit

Download

IEC

Installation manuals

It is strongly recommended to have the kit installed by specialized personnel

Wiring

Check the wiring diagrams of the cables and their technical characteristics

FAQ

Check the most frequent "Questions and Answers" about our temperature regulation systems

Datasheet

Download all the datasheets of the MONZATECH temperature control systems components

Catalog

Download the updated MONZATECH catalog with all the kits and solutions for managing the engine temperature

Download

Download updated software and firmware for our temperature management kits

MonzaTech IEC kit

With our Intelligent Engine Cooling kit
you will no longer have temperature problems!

IEC

It is always difficult to better manage the engine temperature of our motorcycle, but with IEC everything will be easier.

What you will get:

  • Components created in black anodized billet aluminium
  • Optimal control of the engine temperature
  • Maintaining the engine at a set temperature
  • No loss of power even in the heaviest use
  • Proportional control of the pump water flow according to the motor heating
  • Proportional control of the fan air flow as a function of motor heating
  • Less engine wear
  • Cooling even with the engine off: once the engine is turned off, the pump and fan (s) will remain active for 30/40 ‘(depending on the application) to reduce the engine temperature as much as possible
  • Possibility of overhauling the kit
  • Easy implementation of electronic updates for the control unit
  • Professional wiring
  • Dedicated silicone hoses with high resistance to temperature and pressure
  • Assembly manual and instructions included
kit IEC MonzaTech

Store locator

IEC

Enter your postcode, your city or your address and immediately find the nearest resellers and installers, or the official web stores where you can buy your IEC MONZATECH kit.